How to clean a shower screen – using baking soda

Cleaning hack: TikTok user reveals paper towel trick

When you subscribe we will use the information you provide to send you these newsletters. Sometimes they’ll include recommendations for other related newsletters or services we offer. Our Privacy Notice explains more about how we use your data, and your rights. You can unsubscribe at any time.

Cleaning a shower screen can feel like an impossible task at times. When you go at it with the normal cleaning mechanisms, it just seems as though the dirt is being smeared around, making it look even worse than before. One of the most common mistakes made is trying to clean a shower screen with glass cleaner and cloth – this isn’t going to work. But luckily, miracle product baking soda comes to the rescue once again as it’s the ideal way to go at your shower screen – here’s how.

How to clean a shower screen using baking soda

For this simple, quick and effective way to clean your shower screen, you will need:

  • An empty spray bottle
  • An abrasive scrubbing sponge
  • White vinegar
  • Baking soda
  • Glass or window cleaner
  • Clean rag, towel or clean microfibre cloth

Start by wetting the shower screen with the shower hose or splashing the walls with a bucket.

Next, fill a spray bottle with white vinegar and thoroughly coat the glass with it.

Let the vinegar soak in and absorb the dirt for at least 10 minutes.

If your shower screen is particularly badly built up, then allow the vinegar to settle in for a bit longer so as to get the best clean.

Next, dip a scrubbing sponge into baking soda powder and scrub the glass well.

The baking soda acts as an abrasive, allowing all the dirty to lift off, while the vinegar works to dissolve hard water spots and soap scum.

Once you’re happy with the cleanliness of the glass, simply soak off with fresh water.

Dry the glass with a microfibre cloth and use glass cleaner to finish the job by going over the glass, trim and towel hangers.

Cleaning: Mrs Hinch fans share 27p hack for removing tea stains [INSIGHT]
How to stop a washing machine smelling bad [EXPLAINED]
Cleaning: Mrs Hinch fan shares ‘fabulous’ product to clean hobs [REPORT]

How to keep the shower screen clean for good

Hard water spots are some of the most unsightly additions to a bathroom as they dry in the same spot they land.

The best way to keep your glass nice and clean is to stop water from drying there in the first place.

Luckily, there are some preventative measures you can take after using the bathroom to stop this from happening.

One great shower and bath investment is a squeegee, which you can keep handy and wipe down the glass after every shower.

After cleaning the glass, you can apply a specialist compound to keep water spots firmly off the glass.

Install a water softener for a longer-term solution in combatting hard water stains.

Although expensive, it will solve numerous other problems around the house, such as limescale buildup in the kettle.

Water softeners work by reducing mineral buildup on surfaces, including shower screens, and the insides of pipes, taps, dishwashers, shower heads and plenty more.

Source: Read Full Article